Surefire E2LAA-A Outdoorsman – Overview
The SureFire E2LAA-A Outdoorsman is the latest version of SureFire’s only AA battery powered handheld flashlight. Able to operate with alkaline primary, lithium primary, or NiMH rechargeable batteries, the E2LAA-A is rated at 5 lumens for 100 hours in low mode and 115 lumens for 8.5 hours in high mode. Output is focused with a Total Internal Reflection (TIR) lens to provide a tight beam for additional reach while still providing adequate spill for peripheral vision.
As with other models in the Outdoorsman line of flashlights, the E2LAA-A utilizes a pushbutton tailcap which provides momentary operation with a partial press of the button or constant-on activation with a full click of the button. Unlike tactically oriented lights, such as the E2D LED Defender, the E2LAA-A always turns on in low mode first, with high mode selected with an additional press or click of the tailcap switch.
The SureFire E2LAA-A Outdoorsman has a MSRP of $250.
SureFire E2LAA-A Outdoorsman – First Impressions
The E2LAA-A features aerospace aluminum construction with a Mil-spec hard anodized finish and plentiful knurling. The body and tail are unchanged from previous versions with the only difference being the new head assembly.
The attached steel carry clip allows the E2LAA-A to be securely carried in a bezel-up position in a pocket or clipped to a pack. It also permits hands-free use when clipped to the brim of a hat or cap and provides a lanyard attachment point.
The E2LAA-A features a completely redesigned head with a spring contact for the positive battery terminal. Designated as the KE1B, the E2LAA-A head shares the same outward appearance and 22mm optic as the KE1 and KE2 heads found on the E1L-A and E2L-A respectively.
The E2LAA-A comes equipped with Energizer Ultimate Lithium primary batteries installed and can be easily disassembled into its main component parts (head, body, and tail cap). These parts are interchangeable with those from earlier E-series lights.
Owing to its 2xAA design the E2LAA-A is longer than the other Outdoorsman series lights, measuring 6.8 inches in length. This length, combined with the body and tailcap knurling, allows for a very secure hold on the light in both under and overhand grips.
80 lumens (9 hours*)
115 lumens (8.5 hours**)
3 lumens (60 hours)
5 lumens (100 hours)
6.6 inches (168 mm)
6.8 inches (173 mm)
|Weight (w/ Batteries)||
4.4 ounces (125 grams)
4.7 ounces (133 grams)
1.00 inch (25.4 mm)
1.125 inches (28.6 mm)
Manufacturer’s Ratings – * Until output drops to 1 lumen – ** Until output drops to 10%
(Edit 9/30/2013) – SureFire catalogs from 2010-2012 list the weight of the E2LAA as 4.9 ounces (139 grams). The weight shown above is based upon weighing my one sample with Energizer Lithium batteries installed.
SureFire E2LAA-A Outdoorsman – Performance
The E2LAA-A produces a beam with a center hotspot that is bright enough to easily identify items over 60 yards away. The spill beam is very broad, although much less intense, allowing for good peripheral vision out to around 20 yards. The beam has a slightly cool tint with a bit of a greenish hue to the corona around the hotspot.
As with other recent SureFire TIR equipped lights such as the EB1 and E1L-A, the E2LAA-A beam has a smoother transition between the hotspot and spill and has less obvious rings than previous TIR-equipped lights. Some rings are visible when the beam is projected onto a flat surface from close range but are not noticeable in general usage.
Although the E2LAA-A uses the same TIR optic as the new E2L-A and has roughly the same output, the E2LAA-A has a tighter center hotspot due to its smaller LED.
In the following photos, the beam of the E2LA-A is compared to a selection of other lights at different distances. The beams can be compared across the full width of the image using the slider, while additional images can be accessed by using the navigation buttons in the bottom-right corner.
10 Yards to Wooden Swing
30 Yards to Wooden Swing
The E2LAA-A is designed to provide long runtimes regardless of battery choice. Tests were conducted using Energizer Ultimate lithium batteries as well as Sanyo Eneloop rechargeable and Energizer MAX alkaline batteries.
The extended runtime is achieved, in part, by a step-down in output after the E2LAA-A has been on for 2 minutes. The amount of step-down varied slightly by battery type with outputs ranging from 75-80% of the initial output. Like the E1L-A, the E2LAA-A can be returned to full output by switching the light off and cycling back to high mode again.
With the reduction in output, the E2L-AA was able to provide stable output for 8 hours 34 minutes on Energizer Ultimate Lithiums, 4 hours 38 minutes on Sanyo Eneloops, and just over 3 hours with Energizer MAX alkalines. With all battery types the E2LAA-A continued to produce decreasing amounts of light for a considerable time.
When compared to the previous version of the E2LAA, equipped with the KX1B head, the new E2LAA-A demonstrates improved efficiency and manages to offer increases in both output and runtime.
Over the course of the runtime testing, the head and body of the E2LAA-A remained cool with its highest measured temperature being 6 degrees Fahrenheit above ambient (83 degrees).
SureFire E2LAA-A Outdoorsman – Conclusions
The E2LAA-A Outdoorsman is not going to impress people based upon its sheer output nor is it meant to do so. It does what it is designed to do very well which is produce a steady and consistent amount of light for an extended length of time. The ability to use a variety of primary and rechargeable batteries makes the E2LAA-A even more versatile, allowing owners to use what is available rather than relying upon one type of battery.
I consider the timed step-down in output after 2 minutes operation as a good trade-off for the extended runtime. Although the E2LAA-A is still a 2 mode light, this reduced output level is almost like a “hidden” medium mode that some have wished for over the years.
The 2xAA body of the E2LAA-A is considerably longer than what I normally carry on an every day basis and is longer than what I can comfortably pocket carry. However, its slim design makes it extremely easy to carry in (or clipped to) a pack or bag. When in use the extra length is a benefit as it combines with the knurled finish to provide an extremely secure grip.
As with the other new members of the Outdoorsman family, the E2LAA-A has a very useful beam. The hotspot provides plenty of reach and I have come to appreciate the increased spill and smoother beams from the latest generation of TIR optics.
The E2LAA-A Outdoorsman is compatible with SureFire’s new F04-A Diffuser, F05-A Red Filter, and F06-A Blue Filter. Visit their mini-review to see more about these attachments as well as beamshots when used with the E2LAA-A.
- Very useful beam with good reach and spill
- Excellent runtime with over 8.5 hours of output
- Parts compatibility with other E-series lights.
- Ability to use multiple battery types
- The slight bit of green in the beam may be a turn-off for some users. In my use, it has not been noticeable (and is much better than some other new lights), but it is not a pure snowy white.
Additional information about the E2LAA-A can be found on the SureFire website. Share your thoughts or questions in the comments section below or head over to CandlepowerForums and join the discussion there.
Have you ever wanted to know what goes into the production of SureFire flashlights? Check out our exclusive Behind the Scenes look at the SureFire machining and production facilities in Orange County, California.
SureFire E2LAA-A Outdoorsman – Photos
[alpine-phototile-for-picasa-and-google-plus src=”user_album” uid=”106963751361668235976″ ualb=”5902729394879190465″ imgl=”fancybox” style=”gallery” row=”10″ grwidth=”800″ grheight=”600″ size=”800″ num=”25″ max=”100″]